Design and printing

QR code size for printing: minimum size and scan distance

How big to print a QR code: a simple distance rule, a size table for cards to posters, minimum sizes, and the export settings that keep printed codes sharp.

A printed QR code should be at least one-tenth as wide as the distance it will be scanned from. A code read from 1 meter away needs to be about 10 cm wide; one on a table, read from 30 cm, needs about 3 cm. For close-up items like business cards, about 2 cm (0.8 in) is a practical minimum.

That 10:1 ratio is a widely used rule of thumb, not part of the QR code standard. It assumes a simple code, good contrast, and a typical phone camera. More content, a logo, poor lighting, or a steep viewing angle means you should go bigger; for difficult spots, plan on 8:1 or even more generous.

QR code size by scanning distance

Where it’s used Typical distance Minimum code width
Business card, product label 15–25 cm 2–2.5 cm
Table tent, menu, flyer 30–50 cm 3–5 cm
Counter sign, A4 poster up close 1 m 10 cm
Poster on a wall 2 m 20 cm
Shop window, banner 5 m 50 cm

Measure the code itself, without the margin around it. These sizes follow the 10:1 rule, rounded up for small codes, where hand shake and focus matter more. Before a large print run, print one sample at the final size and scan it from the real distance with two or three different phones.

Why some codes need to be bigger

The physical size isn’t what limits scanning. What matters is the size of each tiny square, called a module. A phone has to see each module clearly.

The more content you put in a code, the more modules it needs. The smallest QR code (version 1) is 21 × 21 modules; the largest (version 40) is 177 × 177, according to Denso Wave, which invented the QR code. Print both at 3 cm and the modules in the large one are more than eight times smaller.

So:

  • Shorter content means fewer, bigger modules at the same print size. A 25-character link makes a much simpler code than a 150-character one.
  • Higher error correction (used with logos) adds modules too. See how to add a logo without breaking the code.

Don’t forget the margin

QR codes need blank space around them, called the quiet zone. The standard calls for a margin at least four modules wide on every side (Denso Wave). Without it, a scanner can confuse the code with the text, borders, or patterns next to it.

Leave the margin plain and the same color as the code’s background. Don’t print text or graphics right up to the code’s edge.

Getting a sharp print

Use a vector format when you can

SVG, PDF, and EPS files describe the code as shapes, so they stay perfectly sharp at any size. Use them for print shops and for anything larger than a flyer.

If you use an image file, check the resolution

For print, aim for about 300 pixels per inch (118 pixels per cm) at the final size:

Printed width Pixels needed at 300 ppi
3 cm (1.2 in) about 354 px
5 cm (2 in) about 591 px
10 cm (3.9 in) about 1,181 px
20 cm (7.9 in) about 2,362 px

300 ppi is the usual target printers use for sharp output. A small PNG stretched to poster size will blur, and blurry edges are hard to scan.

Choose contrast and finish carefully

  • Dark modules on a light background. Black on white is the most reliable.
  • Matte beats glossy. Glossy paper and laminate reflect light, which can wash out part of the code.
  • Flat beats curved. On bottles and cups, make the code bigger, so the curve distorts it less.

A light note on EveryQR

EveryQR always includes the blank margin in its exports, at least four modules wide, and you can make it wider. The free version exports PNG, JPG, and WebP at 512 px, and PDF at a 5 cm printed width, which covers most small prints. EveryQR Pro adds SVG and EPS, image exports up to 4096 px, and other print widths from 2 cm to 20 cm. Before you export, the scan check reminds you to test a printed sample at its final size.

Browse all QR code guides.

All QR codes guides